Tank-Liner Connectors

    4" Threaded tank connector  

Simply place a hole in your tank or liner. Push the tank-liner connector thru and tighten the large threaded nut. 

    Tank-liner connector 

    Available in three sizes
    4"
    3"
    2"
    

Easy liner installation, simply mark the liner with the tank connector and pierce the screw holes with an awl, place a bead of silicone on the face plate and then install the screws.

    Your installation should now look like this.

Cut out the pipe opening with a sharp knife.

   Completed installation.

To install in tanks simply follow the same directions except you have to use a drill and a hole saw.